PCB prototype,PCB Manufacturer,PCB Assembly,PCB Maker,zfpcba

<noscript><iframe src="https://www.googletagmanager.com/ns.html?id=GTM-MCTHB7V" height="0" width="0" style="display:none;visibility:hidden"></iframe>

- English

ZF PCB Fab Service

ZF Electronics, as one of the top printed circuit board manufacturers/suppliers in China, can provide customers with single-sided PCB, double-sided FR4 PCB, metal core PCB, heavy copper PCB, rigid PCB and rigid-flex PCB.

Standard PCB

Standard PCB

Advanced PCB

Advanced PCB

Special PCB

Special PCB

Craft PCB

Craft PCB

Metal PCB

Metal PCB

In a new printed circuit board design, printed circuit boards have many technical uses.

Double Sided PCB

Double sided PCB board produced by the PCB company is one of the important PCB board in circuit board.

4 layer PCB is laminated on the basis of double-sided PCB, PP and copper foil are added on both sides of the double-sided PCB.

Printed circuit board (PCB) now plays the most important role in electronic products.

Flexible PCB is made of flexible insulating substrates.

Rigid-flex PCB is a new type of PCB that combines the durability of rigid PCB and the adaptability of flexible PCB.

Ceramic PCB is widely used due to its high thermal conductivity, low CTE, chemical resistance and low dielectric constant.

Compared with conventional PCBs, HDI PCBs have thinner lines, smaller holes and higher density, thus it is helpful for chips with many pins in mobile devices and other high-tech products.

Halogen-Free PCB

In order to meet the requirements of halogen-free PCB, the content of halogen contained in the circuit board must not exceed a certain amount.

Thick Copper PCB

PCBs are usually bonded to a layer of copper foil on a glass epoxy substrate, the thickness of which is usually 18μm, 35μm, 55μm and 70μm.

Rogers PCB is a type of high-frequency board.

Rogers Mixing Lamination PCB

High frequency material and Rogers4350b + FR4 mixing lamination.

A buried via is a connection of any circuit layer inside the PCB but not connected to the outer layer.

As the name suggests, blind via cannot be seen. Blind via is the via that connects the surface layer and the inner layer without penetrating the entire board.

Plating Through Hole PCB

Plant through hole via PCB or PTH PCB is the most common type.

Quick turn PCB is characterized by its quick operation, including one-time delivery, which stands for ZF high efficiency.

Aluminum substrate has excellent electrical performance, heat dissipation capacity, high dielectric strength and bending resistance, etc.

Copper PCB products are widely used in power electronic equipment and power supply systems.

The iron-base PCB is made of special steel, silicon steel and FR4 or CEM1, which can dissipate heat from key circuit board components to secondary areas.

Thermoelectric Separation Metal PCB

Separation of power layer and heat dissipation layer, copper base and highly reflective silver plating.

ZF PCB Assembly Service

PCBA is a process requiring knowledge covering PCB manufacturing and assembly, PCB design, fabrication and a strong understanding of the final product. ZF is a professional PCB & PCBA manufacturer with high-quality, all of our products have obtained ISO9001, ISO13485:2016, IATF16949:2016, IPC-A-610E, UL, RoHS certifications.

Prototype PCB Assembly

Prototype PCB Assembly

In order to quickly assemble PCB prototypes, conventional PCB mass production relies on a fixed process to provide the most consistent results. Thus, prototype PCB assembly is in great demand at that time. The goal here is to distribute high-quality circuit boards without any assembly errors in order to keep the production process smooth.

SMT PCB Assembly

SMT PCB Assembly

Most of today's mass-produced electronic hardware manufactured by most circuit board manufacturing and PCB fabrication companies is using surface mount technology or SMT.

Turnkey PCB Assembly

Turnkey PCB Assembly

For companies of all sizes, a complete turnkey PCB assembly has several significant advantages. Turnkey PCB assembly means that the PCB board supplier and company is responsible for all aspects of the PCB project. This means purchasing parts, manufacturing and assembly.

Mixed Technology PCB Assembly Services

Mixed Technology PCB Assembly Services

The printed circuit board made by the PCB board manufacturer is the core of every electronic device we connect today. These PCBs basically interconnect electronic components by establishing conductive paths through copper pads and connecting wires. Therefore, the mixed technology PCB assembly process has become one of the most interesting concepts in electronics.

Box Build Assembly

Box Build Assembly

Final product box build assembly services are provided by ZF board manufacturing company. The box build is also known as systems integration, and the box build assembly refers to the whole assembly of the finished product.

High Volume PCB Assembly

High Volume PCB Assembly

High volume PCB assembly by our PCB factory is used to manufacture large quantities of the same products, such as PCBs in white goods, televisions, automobiles.

Low Volume PCB Assembly

Low Volume PCB Assembly

With PCB becoming an indispensable part of more and more devices, PCB prototyping technology is at the highest level in history. As printed circuit board manufacturers continue to innovate, sometimes small batches of PCB assembly are required, which can provide high turnaround times without leaving manufacturers stuck with high inventories that they can't use.

Wire Harness PCB Assembly

Wire Harness PCB Assembly

ZF circuit board company provides wire harness PCB assembly services with customers.

PCB Capabilities

PCB Capabilities

PCB Assembly Capabilities

PCB Assembly Capabilities

PCB Materials

Components Sourcing

Components Sourcing

SMT Stencil

Case Studies

ZF Various PCB Market

PCB is a key component of electronic products made by the PCB circuit manufacturer, and is widely applied in various fields with prosperous market, including medical, aerospace, military, computers & SSD, automotive, energy, microwave & RF PCB, LED.

Medical

PCBs made by the printed circuit board assembly manufacturer are widely used in medical areas. Whether it is pacemakers, defibrillators and heart monitors, or MRL, CT scans, ultrasound equipment and other medical equipment, PCB plays a significant role.

Aerospace

PCB with thermal management function is the main USB of any operating system used in the aerospace industry.

Military

In contrast to standard boards, PCB made by the PCB assembly factory means that military and aerospace applications require special treatment in terms of design, manufacturing and assembly.

Computers & SSD

The development of computer & SSD cannot be realized without the PCB that made by the high quality PCB manufacturer.

Automotive

Generally, PCB for automotive applications is coated with any of the four finishes listed below.

Energy

Compared with the traditional fuel vehicles, the new energy vehicles are added charging, energy storage, power distribution and voltage conversion equipment, which will bring a lot of new application scenarios to PCB.

Microwave & RF PCB

Microwave & RF PCB produced by some printed circuit board assembly companies is used in a variety of products based on wireless technology.

LED PCB

There is a printed circuit board at the heart of every electronic product which is the basis of most electronic products today.

PCB in Medical Market

PCB in Medical Market

PCB in Aerospace Market

PCB in Aerospace Market

PCB in Military Market

PCB in Military Market

PCB in Computers&SSD Market

Computers & SSD

PCB in Computers&SSD Market

Computers & SSD

PCB in Automotive Market

PCB in Automotive Market

PCB That Applied In Energy Market

PCB That Applied In Energy Market

PCB in MICROWAVE & RF PCB Market

Microwave & RF PCB

PCB in MICROWAVE & RF PCB Market

Microwave & RF PCB

LED Lighting PCB Assembly

LED Lighting PCB Assembly

ZF Electronics was founded in 2003, headquartered in Shenzhen China, the world's most complete electronic supply chain. ZF electronics has been a professional one-stop PCB assembly and manufacturing factory, from prototype to mass production. Our process includes recommending customers to select easy-to-purchase p/n components in the design stage of a new project and purchasing all electronic components, PCB manufacture, PCB assembly, testing, and fast delivery to our customers.

We have passed ISO: 9001, ISO: 13485, IATF: 16949, UL, RoHS, PDCA, and IPC-A-610E certifications. Our modernization factory is equipped with MES+ERP+ IoT digital management.

We have 700 + customers all over the world. Some of our customers include CTS, Tesla, FEV, Delta, and Premo. We can do not only R&D institutions or individuals as well as well-known enterprises, we try our best to let our customers satisfied.

ZF Customer Cooperate Projects

CTS Corporation U.S. listed company founded in 1896. A
world-renowned manufacturer of auto parts and electronic parts.

1.2 million PCS/year for automotive sensors
The project cooperation started from 2016 to present
Customer specified solder paste AIM NC258 customer-specified device AVX /MURATA HED /MICRONAS /connector is customized by our company
Especially configure SMT production line, customize DIP welding equipment, and package customer-specified customization

CTS

The comment came from one of our customers GM who is very satisfied with our service and products, PCBs and PCBA.

Part Description: Non-Contacting Inductive Accelerator Pedal Module (APM)
Business Unit: Mexico
Annual Volume: 250,000 pedals/year
Program Life: 7 years
SOP: Q4 2019
Customer: GM

Commsat

Founded in 2015, Commsat is a leading private satellite technology company in China, providing enterprises and governments with low Earth orbit (LEO) commercial satellite products and services.

Our highly customized, Satellite-as-a-Service business comprises LEO satellite manufacturing and in-orbit delivery, LEO constellation design and building, satellite terminal applications and industry solutions, as well as space science education systems. As an active participant in satellite internet infrastructure construction in China, we have been operating eight LEO satellites as a pioneer in the private sector and developing a fleet of new models to meet client demands for higher speed of telecommunication, greater precision of navigation and better quality of remote sensing from the space. We are building the first-ever private satellite manufacturing facility in China, with a capacity of 100 LEO satellites per annum. Our business locations across China include Beijing, Shanghai, Tangshan, Chengdu, Yibin and Guangzhou.

Commsat

Trina Solar Co., Ltd., founded in 1997, manufactures, sells and does research and development on PV products, EPC and O&M.

Trina Solar Co., Ltd., founded in 1997, manufactures, sells and does research and development on PV products, EPC and O&M.

Trina

Experienced in PCB&PCBA for nearly 20 years

 Contact Us Now

Latest News From ZF

PCB Assembly Manufacturing SMT Quality Standards

PCB Assembly Manufacturing SMT Quality Standards

Jan 25.2022

PCB Assembly Manufactures SMT Auxiliary Materials

PCB Assembly Manufactures SMT Auxiliary Materials

Jan 18.2022

Inspection Standard for the Appearance of PCB Assembly

Inspection Standard for the Appearance of PCB Assembly

Jan 11.2022

Features and Benefits of Flexible Circuits

Features and Benefits of Flexible Circuits

Jan 04.2022

PCB Fab

Standard PCB

PCB Prototype Double Sided PCB 4 Layer PCB Multilayer PCB

Advanced PCB

Flexible PCB Rigid-Flex PCB Ceramic PCB HDI PCB

Craft PCB

Buried Via PCB Blind Via PCB Plating Through Hole PCB Quick Turn PCB

Metal PCB

Aluminum PCB Copper PCB Iron Base PCB Thermoelectric Separation Metal PCB

Special PCB

Halogen-Free PCB Thick Copper PCB Rogers PCB Rogers Mixing Lamination PCB

PCB Market
PCBA/PCB Assembly

About ZF Why ZF Testimonials Factory Show



Phone: +86-188 7956 1688

 Email: service@zfpcba.com



Address: Number 62, Dayang industry, Lougang Street, Songgang Town, Bao'an District, Shenzhen, China

PCB Fab

Single Sided PCB Double Sided PCB PCB Prototype 4 Layer PCB Multilayer PCB Rigid-Flex PCB Rigid PCB Flexible PCB Halogen-Free PCB Thick Copper PCB Rogers PCB High TG PCB Blind Via PCB Buried Via PCB Plating Through Hole PCB Aluminum PCB Metal Core PCB Ceramic PCB HDI PCB Rogers Mixing Lamination PCB Copper PCB Iron Base PCB Thermoelectric Separation Metal PCB Quick Turn PCB FR4 PCB

PCBA/PCB Assembly

Prototype PCB Assembly SMT PCB Assembly Turnkey PCB Assembly Mixed Technology PCB Assembly Services Box Build Assembly High Volume PCB Assembly Low Volume PCB Assembly Wire Harness PCB Assembly

PCB Market

Medical Aerospace Military Computers & SSD Automotive Energy Microwave & RF PCB LED PCB

Resources

FAQs Blog Video PCB Panelization Glossary of Terms PCB Design Resources PCB Software Guides

Number 62, Dayang industry, Lougang Street, Songgang Town, Bao'an District, Shenzhen, China

service@zfpcba.com

+86-188 7956 1688

Sitemap Privacy Policy

+86-188 7956 1688